Tag Archives: Custom Bicycle Builds

Pave Prototype Update and a Super Clydesdale Journey on the PAVE

Posted on by
1

Work on the stainless steel prototypes have been moving along slowly. The bikes, the Pave and Velo Routier Stainless Steel have been out in the Pacific Northwest and are presently at  P.T. Cyclery  in Port Townsend, WA. where you can test ride them and give us some feedback. We will be building a second set of prototypes this fall.

David Toman, a self-declared “Super Clydesdale” gave us full report on his extended ride:

It has been three days now since I last swung my leg over Cycle Toussaint prototype bike the PAVE’. I still can feel the yearning of both myself and the bike to see what is beyond the next mountain. Where would this road or trail go? Can we do that downhill part again but even faster? I know to some it is hard to think of a bike having a soul but this one does. For me I was immediately connected to the Pave’ on my first trip. Granted I had some concerns about the rear wheel being only 24 spoke.
Alas I am getting a head of myself. Let me tell you how this all came about. A few weeks ago I was in Port Townsend, WA with my wife. Naturally I stopped into PT CYCLERY to chat with Bob the owner. I had bought a road bike from him because my commute/mountain bike just could not give me the need for speed that I was desiring. Well, along the wall stood this bike. At first it reminded me of bikes I had seen built in some ones garage with whatever they could find and use for parts. I myself had taken my Stingray, to us we called them Cheater Slick bikes and extended the forks to give it more of a chopper look. Needless to say we had some interesting accidents. Then I realized this was nothing like those bikes. It was funky yet in a very cool way. I loved the plates on the seat stay and forks. That and the fact it was stainless steel caught my attention. Bob let me take it for a quick spin. Those few minutes was all it took for me to realize there was more to this bike beyond just the cool look and white tires.
After returning the bike I later wrote to the guys at Toussaint and let them know what I thought. Soon after Bob texts me and offers to let me take it out for a real ride. I asked if he was joking because he could end up losing the bike. He was serious. So we made plans for me to pick it up when spring break starts. That way I had most of the week to put the bike through its paces. Let me tell you after 186 plus miles and almost 7000 feet of elevation gain I just touched the tip of what this bike is capable of doing. This with me a Super Clydesdale riding it! For those who don’t know there is basically three type of rider sizes. You have normal. Clydesdale which is anyone over 200lbs to about 250lbs. Then the Super Clydesdales who are over 250lbs and we break things a lot. I am at around 270lbs and my local bike shop can attest to the fact I am hard on rear wheels among other things.
Thus the reason I was tentative on my first ride. I soon realized I had nothing to worry about. This bike would take me where ever I wanted to go and still be up for more adventures. I did group rides hanging with the lead riders. Went up dirt roads in the mountains just to come screaming down paved roads hitting speeds of over 40 mph a couple of times. Took on head and side winds like they were a slight breeze kissing my cheek as others struggled to keep their bikes steady. When I needed more speed I got it instantly like a guy using his heels to urge his horse to go faster. Again this with 32mm knobby tires.

0406161139a
I am not going to get into all of the technical things on this bike, but I can tell you from the stand point of a Super Clydesdale if you wanted just one bike to do it all for you this is it. Rather than buy several bikes for road, CX, gravel, touring or whatever all you need to do is buy tires. The stainless steel frame and carbon fiber handlebars helped to make the ride very comfortable. Having disc brakes was also a huge plus. Oh, did I mention the bike weighed around 22lbs?
One last thing. This goes out to Bob of PT CYCLERY. You mentioned that every bike/steed should have a name. Well I gave it some thought and came up with the perfect name, Barnabas Sackett. For those who know anything about the western writer Louis L’Amour you will recognize and understand why. If not let me quickly explain. In a series of books L’Amour wrote about the Sackett family. They were strong dependable people who you could always count on when the going got tough. They were also adventurers always wanting to find out what lies past the next mountain, what awaits beyond the next bend in the river. They also took no BS from anyone. So Barnabas Sackett is the perfect name for the bike. Just call it BS for short because it won’t take any.
Thanks again for allowing me the privilege of riding a great bike and one I know will always hold a place in my heart and soul.
0406161109

 

David will be riding the Pave prototype again September 24th is the Big Hurt competition in Port Angeles and the bikes will heading back home to Calgary.

 

 

My Velo Routier 1.0 Build

Posted on by
Reply

I purchased this frame almost a year ago direct from you guys and have been slowly accumulating parts. I finished the build a few months ago and have been riding it hard since. 

For the past few years I have been looking for the one bicycle that would satisfy 90% of the riding I do: commuting, long distance riding/randonneuring, gravel and forest service road riding. One day I happened to see your Velo Routier in an issue of Bicycle Quarterly. It finally clicked that this was my ticket to the low-trail world of Alex Singer and Rene Herse without spending my life savings. Sure enough, its a bomb proof adventure machine with a surprising amount of speed. 

I built it up with the stock Cycles Toussaint crankset (I love that there is no branding) and headset, added some Nitto and Velo Orange components, eBay Ultegra derailleurs, Gevenalle cyclocross frankenshifters, and of course Mafac “Raid” center pull brakes. The 50mm VO Snakeskin fenders were a squeeze, but I have had no issues with tire-fender clearance on a multitude of gravel and dirt surfaces. I do wish I could put larger fenders on the frame so I had more wrap-around (I guess that is called the 2.0). The wheels are Velocity Synergy (O/C rear) laced to a Shutter Precision front and Ultegra rear shod with Compass Babyshoe Pass 42mm tires.

For the quintessential rando bag I ordered a custom bag from Treetop Bags in Chicago, Illinois. These bags are not very well known and are very affordable, while still being hand-crafted. I wanted a rack that sat lower than the stock Cycles Toussaint rack so I could direct-mount the fender. I didn’t want to have a custom rack made and took a risk on the Compass CP1 center-pull rack after some not-so-precise on screen measurements. The rack stays ended up being only 3mm off and I was able to get the fit with a cheap tubing bender. The decaleur is made from a P-clamp, U-bolt, and paint stir stick inside the bag for lateral support. At $10 it’s a fraction of the cost of a production decaleur and just as sturdy and light. 

I wanted dynamo powered lights front and back. But, I am not a fan of the zip tie method for wiring stock frames, especially with a taillight. It looks tacky and unfinished. To “hide” the wire, I glued it to the inside of the rear fender with automotive grade black silicone. I then ran it through the chainstay bridge hole on the fender and secured the wire to the BB cable guide with a washer. Next, I ran the front derailleur cable and the tailight wire through some shrink tubing up along the down tube (I stole the idea, works great) and then in and out of the front fender to the headlight. For the dynamo wiring I fished the wire through the rack boss on top of the fork crown, down through the blade, and out the vent hole. Unless you are looking for it, the wiring is all but invisible! 

I attached some pictures as well. Thanks for the awesome ride! 

Cheers,

Jay 

Tacoma, Washington

Processed with VSCOcam with g3 preset

Stainless Steel Vélo Routier Prototype

Posted on by
8

We have been riding our second stainless prototype around Calgary for the last 2 months and were supposed to report back on it weeks ago but summer has been really nice here for a change and well, you know how it goes…

The protoype is a 650B frame based on the same low trail geometry as our cro-mo 650B Velo Routier frame. .Like the Pavé Prototype, it is made from Carpenter stainless steel with a twin plate crown fork, disc brakes and 1-1/8″ Aheadset.

 

2015-06-30 17.43.18

 

We stuck to the tried and true Velo Routier V1 geometry and made a few improvements to increase fender/tire clearance.

Top Tube 31.8mm Dia 0.7/.04/0.7
Seat Tube 31.8mm Dia 0.7/0.4/0.7
Down Tube 38.1mm Dia 0.8/05/0.8
Top Tube Length 550mm
Seat Tube Length 540mm

Chainstay length 430mm
Bottom Bracket Drop 64mm
Wheelbase 1028mm
Head Tube Angle 73 deg
Seat Tube Angle 73 deg
Trail 30mm
Rear Axle Width 135mm

It has clearances to accommodate 54-55mm wide fenders and braze-on fixtures to attach fenders and racks to. We fit up our prototype with 52mm Velo Orange Zeppelin fenders. A rfear fender attachment to the underside of the seat stay bridge was spec’d but missed on the fabrication of the prototype.

2015-06-30 17.44.302015-06-30 17.45.39

We deigned an all stainless steel with a twin plate fork crown similar to the Pavé. Unfortunately, the prototype is also missing the top of the crown fittings.

2015-06-30 17.45.00
Bare frame weight is 1998 grams vs. 2177 grams for medium cro-mo VR 54 cm frame and the bare fork weight is 926 vs. 958 grams. Even accounting for the extra weigh of the disc brake fittings, it not a huge weight saving for you weight weenies but we think the ride is super smooth and frame is bomb proof ! With a bit of refinement, we think we might be able to shave another 50-70 grams off but not the at expense of durability.

2015-06-30 17.44.48

The Pavé protoype is at Free Range Cycles in Seattle for the next couple of months and the stainless steel VR prototype should there in 2-3 weeks. If you are in the area, drop by and say hi to Kathleen. Give our prototype a good test wring out – we really want to hear your comments and suggestions!

 

 

 

Never mind the bling, I’m a working bike

Posted on by
Reply

So I pull up to a stoplight, and there’s a rider on a $9 000 carbon road bike admiring his reflection in a shop window. He sees me pull up and does a double take but says nothing – just fixes his gaze forward. Whatever, I’m used to it.

My name is Jacques and I’m a Cycles Toussaint Velo Routier. I understand everyone’s confusion. My brothers and sisters and I all have the looks to be café poseurs – gumwall tires, cream paint, retro drop bars, polished stainless racks front and rear. But, my gumwalls are covered in road grime, my rear rack has a mixed luggage set of a laptop bag and an ancient serratus pannier full of office clothes. My front rack has a $10 Rona tool bag bungeed to it (this was added when Mike, my rider, realized I like to have my load balanced front to rear so tools, raingear, tubes and lock now ride up front).

See, while I have the looks, in fact, I’m a working bike. Sure, I’d like to go on epic rides through rolling green fields of Provence, Tuscany, or anyplace that is evocative of Provence or Tuscany. I’d like to climb the Alps, Rockies, or Green Mountains. But, for now, I cruise the mean streets and bike paths of the Toronto as a commuter.

Sorry of this seems immodest, but I’m pretty good at it. My frame and racks can carry the gear, my fenders keep rider and stuff clean when it rains. A compliant frame and big cushy tires soak up the cracked pavement. In many ways, I have more in common with the slick shod mountain bikes with whom I share the paths than the carbon road bikes and hipster fixies (note – nothing wrong with either, I’d share a garage with any bike). What I have over the mountain bikes is legs – I’m leaner, lower, smoother. While my heavier frame and tires means I can’t accelerate like those fancy road bikes, I give up little or nothing in terms of rolling resistance and aerodynamics. So, when there’s a clear path ahead, I can stretch out and pick up a gear or two.

Speaking of gears, one thing my rider did that hurt the show but helped with the go was to install a set of Microshift integrated shifter/levers. I know, not retro and the black hoods meant the crème bar tape had to go. But, dodging potholes, cars, pedestrians and slower bikes in the city, keeping hands on the bars while shifting matters. They work well and I overhead Mike telling another rider they shift almost as smoothly as the Ultegra STI levers he had on his old race bike.

Smooth matters. You can read about the theory that a more comfortable (bigger, less inflation pressure) tire saves the rider energy on bumpy surfaces. There is something to that. But, there’s also something psychological. Let’s face it, much as we hate to admit it, bikes make little difference – it is all about how much energy the rider can / chooses to expend. And, I’ve noticed that when things are smooth (tires inflated just right, clean chain, rolling along like some great flywheel), my rider puts in a little more effort. It is subtle, but, KM after KM, it adds up.

See, in addition to hauling the gear through frost heaved streets and distracted drivers, my job is to make it a joy to ride. The better it feels, the more my rider will make time to ride, the harder he will push, and the stronger he will get. Then, maybe, just maybe, he’ll take me on that vacation to Tuscany, or Provence, or someplace like that.

My name is Jacques. I’m a working bike, but I have dreams too.

My first weekend with a Velo Routier

Posted on by
Reply

I headed to Walla Walla, Washington in late April with my son. My son was competing in the Tour of Walla Walla Stage Race. This annual race presented by Allegro Cycle draws hundreds of riders from the U.S. Northwest and Canada. Walla Wall is located a few hours drive south west of Spokane. As one gets closer, the green rolling terrain appears to be stripped directly from a Microsoft Desktop Background.   After all of those years of staring at my PC, it now seems crazy not to think that the background was based on an actual location. All the towns in the Walla Walla area are wonderfully cared. The downtown Walla Walla core is alive with café’s, restaurants, boutiques as well as Whitman College. Apparently, there are over 100 vineyards in the surrounding area. Walla Walla like many US towns has big box stores that encircle the town. But, Walla Walla has not been hollowed out by their presence and have kept the downtown core vibrant.

I had never ridden a Velo Routier before this weekend or taken it out in public. It really seemed to be a conversation starter at the Tour stages and stand out in the crowd.  The Velo Routier always brought smiles to people’s faces. I received compliments across the spectrum. Even a few of the pro riders asked to check it out. The bike seems to have a timeless quality as folks would ask “Is it new?” and “Is it old?”. Watching the Time Trial (TT) start, the character and lines of the Velo Routier seemed juxtaposed against the robotic, heartless, singular tasked carbon TT bikes waiting in a line for their start times.

Riding the bike feels casual and comfortable. But don’t be fooled as this bike can get you smartly to your destination whether running errands or touring across secondary roads. It is a smooth ride on gravel, rough pavement and even the occasional bumpy field for a short cut.

My one complaint is that the bike always seemed to keep drawing me closer to any establishment that provided food and/or drink. Here are some great places to try if you are in the area:

  • Breakfast at the Maple Counter Cafe
  • French Macarons along with Assame Black Tea at the Walla Walla Bread Company
  • Paris-Brest Pastry at the Colville Street Patisserie. (Never before have my eyes closed and rolled into the back of my head on a first bite)
  • Dinner at the Whoopemup Hollow Café in Waitsburg, Washington

Safe Travels, Angus Cowan

IMG_20140419_082235IMG_20140420_095639IMG_20140420_162303IMG_20140420_164711On Campus @ Whitman College

 

 

Stonehog Velo Routier Build Review

Posted on by
Reply

Brian has posted a detailed review of his Velo Routier frame build on his Cycle Settle Stonehog blog. Here is a picture from his site to pique your interest.

 

Stonehog Velo Routier 1

Note the tasty Rene Herse crank and Acorn Boxy Rando front bag. And the green grass and open water in the background. On a more than slightly jealous note, here at the Toussaint world HQ we have been hunkered down to temperatures in the  -20 C to 30C range for the last 3 weeks and some side roads with ice ruts, I kid you not, a foot deep. But we are catching a break, it supposed to warm up to  a relatively balmy +6C today. Time for a pond hockey break!

 

 

 

 

 

Madonna di Ghisallo – The Patron Saint of Cyclists

Posted on by
Reply

Evan_VR_4 - Copy

A little more on the medallion on the top tube of my build. Madonna di Ghisallo is the patron saint of cyclists. The medallion can be bought from the chapel  at the top of Ghisallo Pass north of Milan but I bought a few from a table a the bike jumble the Saturday before I rode L’Eroica 2012 . Unfortunately, we don’t have any for sale but apparently Ric Hjertberg, the “Wheel Fanatyk”, has some available  http://wheelfanatyk.blogspot.ca/ .
The medallion has an embossed Madonna di Ghisallo framed by a chainring and chain with an inscription in Italian that translates to “The Madonna Will Protect”.  She is flanked by the inscription ” Keepsake Ghisallo Sanctuary”  on the one side and the chapel set in mountains on the other.  It comes with long straps that can accommodate put to 31.8mm diameter top tube. I’ve seen a few creative installations on stems and handlebars but I decide to mount it the “proper” way on the top tube which required cutting off the excess strap and some filing.