Guest Post | Another Velo Routier Review

Jim's  60cm Velo Routier Build  Vancouver BC - 2

My journey to the Cycles Toussaint Velo Routier started with an impulsive act in October 2011. During Bike to Work Week Vancouver I ended up at an information session for The Ride to Conquer Cancer. Somehow I said to myself “I can do that” and signed up.
What was I thinking! I was moved by the stories I heard but up until then my idea of “cycling” meant going out on a sunny afternoon and tearing around town for a couple of hours. I spent the following winter living in terror that I wouldn’t raise enough money or get in good enough shape to complete the 120km/day, two day ride, embarrassing myself before all the people I hit on for donations. I rode religiously, read books on training and by December realized the vintage Italian race bikes I was riding were not the right type of bike for this ride.

Consequently I picked up a modern sport touring frame (Soma ES) and set it up with a triple crank with lots of low gearing, fenders and big fat 28mm tires. The day of the ride came and I had a ball. Lots of riders on fancy carbon bikes with skinny tires passed me but eventually I passed many of them on the side of the road fixing flats. It also rained for most of the first day and a half so I was grateful for the fenders. This led to more 120+km rides over the summer and a newly discovered love of distance cycling but also to an increasing feeling that this bike was just too much “touring” and not enough “sport”.

The Ride to Conquer Cancer terminated in Seattle and the following day I had visited Elliott Bay Cycles near Pike Market. The place is a museum of vintage bikes and in the store was this slightly odd looking custom bike with a $7,000 price tag. Bob Freeman, the owner explained “that’s a 650B wheeled bike, they have quite a following here in the Northwest”. This sparked my curiosity and I started researching what these bikes were about. From what I could find out, they offer the smoothness and comfort of a wider tire with less mass and greater speed than 700c wheeled bikes.

Well I’m not in the league to pony up $7,000 on a type of bike I’ve never ridden but I also discovered lots of people were taking regular frames and converting them to 650B wheels. As a result I spent the winter repainting a frame and building my own 650B conversion.
My goal was to get the bike completed in time for the Tour de Victoria where I was signed up for the 100km leg. I built the wheels and installed Dai Compe 750 center pull brakes. The long-reach brakes were necessary to reach the braking surfaces on the smaller 650B rims. Three hundred kilometers of test riding in flat, dry Delta where I live gave me the false impression I was ready.

The day of the ride dawned cold and damp and I knew the moment I rode up to the start line that my brakes were not handling the wet that well. No problem I said to myself, “I would take it easy, this is a ride not a race.” The first challenge was a long, steep climb up Munn Road. On the way to the top it began to rain in earnest. I reached the top OK but was not expecting the steep and narrow descent that followed. Within 200 meters I was fighting to control the bike and picking up speed. A third of the way down at about 50km per hour my wheels locked up throwing me to the ground. The next thing I knew I was looking at the sky trying to breathe. Medical support arrived quickly and I was transported to hospital where I spent a week with a broken collar bone, broken ribs and a collapsed lung.

Lying around rehabbing gives you lots of time to think and I was already planning a safer 650B bike. I had checked out the Velo Routier the winter before and decided I liked the fact it was a Canadian company but most of all I liked the braze-on brake mounts. I had never cared for cantilever brakes and thought they looked out of place on a road bike. I ordered the bike and it was delivered within a week. During that week I picked up a new Ultegra 10 speed compact group on Craigslist and ordered online a set of matching hubs, Dura Ace 10-speed bar end shifters and Cane Creek SCR-5 Brake Levers. Most of the rest of the components would move over from the conversion. These included a Nitto Technomic 80mm Quill Stem and Nitto Rando Bars, Velocity Synergy Rims with an OC rear, Velo Orange Hammered Fenders, Brooks Pro Saddle and Soma Crane Brass Bell. Most ironic is the fact that the same brake calipers that landed me in the hospital, minus their wobbly center pieces, bolted straight onto the braze-ons on the Velo Routier. Finding nice, “look alike” 6mm chrome hex bolts to attach the calipers led me to an online motorcycle supply outfit in North Carolina, Scootworks.com (great service, inexpensive and fast shipping!).
When the frame arrived I excitedly set about rust proofing it but when I assembled the headset I discovered that I had been sent a mis-matched frame and fork. The frame was 60cm and the fork for a 57cm bike. An email to Evan at Cycles Toussaint quickly remedied the situation and within a week I received a fork for the 60cm frame and a 57cm frame. This was a blessing in disguise as I had agonized over what size to order. I normally ride a bigger frame than my height might suggest but I was just not sure about a frame with low trail geometry. I built out the 60cm frame first and it turned out to be just right for me. The second frame will be sold off for charity.

The build was remarkably easy! The fenders which had been a real chore fitting to the non-650B frame went on to the Velo Routier like soft butter on hot toast. The matching rack from Velo Routier is a very attractive addition and went on like it was made for the frame (it was). The only unexpected issues were the stack height for the headset was a bit long even after adding a center-pull quick release hanger and the brake set I had chosen did not allow for releasing the rear brakes to clear the wider tires. The stack height was remedied by a quick visit to my LBS for an additional headset spacer and the rear brake clearance corrected by a couple of inexpensive Jagwire in-line adjusters.

As I am still rehabbing from my crash I have only had a couple of short runs to date but the ride is dreamy and fast. The brake power and modulation is excellent. I’m running 38mm Panaracer Col de la Vie 650B tires which are comfy and quick but would love to see how the bike handles with a set of Grand Bois Hetres. I am a born-again convert to 650B bikes and recommend them to anyone but if you are thinking of building a conversion, I say be very careful!

Jim Sutton
Tsawwassen British Columbia Canada

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s